Ultimately, manufacturers are seeing that things are done faster, done right, and done once with a connected workforce leveraging smart glasses in 2021.

Aerospace industries have complex manufacturing processes consisting of thousands of moving parts. These two industries, as a cross-section of manufacturers, exemplify high-value assembly lines where speed, exception handling, and quality control are critical to their business and competitive advantage.

The execution of these activities goes a long way towards driving the ultimate financial performance of the organization. It is a top priority for these leading manufacturers to identify tools, resources, and technologies that can improve employee performance in mission-critical tasks.

Productivity as a relation to human capital is in constant focus. A 2020 U.S. Bureau of Labor Statistics report noted an improvement in manufacturing productivity in 56% of manufacturing segments; despite the general advances in robotics. Manufacturing sector labor productivity increased at a 19.9 percent annual rate in the third quarter of 2020 as output increased at a 56.2 percent annual rate and hours worked increased at a 30.3 percent annual rate. These series-high increases in the third quarter of 2020 follow the largest decreases in these
three measures in the second quarter, when total manufacturing productivity fell 14.0 percent, output dropped 46.5 percent, and hours worked fell 37.8 percent. As of the third quarter of 2020, output remains 5.7 percent below its fourth-quarter 2019 index level, while hours worked is 6.8 percent lower.

2020 manufacturing productivity increase chart

One potential solution is that the human element of manufacturing can swing bigger gains if properly equipped with technology that modernizes the way people interact with manufacturing processes.

We hear from aerospace customers that a fully connected workforce – with ready access to instructions, expert assistance, and communications while-doing their essential tasks – provides clear and immediate value to their organization.

Gartner Research has noted the advantages of a connected workforce as well and believes that manufacturing is leading all other industries with Internet of Things (IoT) connected devices.

This creates a unique challenge for aerospace manufacturers who have employees building their complex products. How are the employees performing manual tasks supposed to access that information if they are using their hands in the assembly process?

Why Wearable Devices Are Different from Other Mobile Devices

Wearable devices such as smart glasses and smartwatches are an emerging breed of mobile technology that has the potential to contribute to greater manufacturing outputs by giving the ar smart glasses for inspectionworkforce a direct interface to the smart systems and automation investments around them.

Smart glasses are considered the most powerful of the wearable devices and enable a manufacturing workforce to receive information and alerts from enterprise networks while remaining hands-on with their work.

Imagine the increased efficiency on an assembly line if you could visualize the custom ordered a package on the aircraft coming down the line without having to fumble around for a manifest list.

The information is in your line of sight when you need it.

Smart glasses allow employees to connect to the information generated in an IoT environment while remaining hands-on in the manufacturing process. Smart glasses also allow employees to become digital contributors or nodes, as Gartner puts it, in the IoT network.

Employees with smart glasses can do more than passively receive information from enterprise networks; they can contribute by documenting issues and receiving real-time remote advice on how to address the issues. People doing complex or custom configuration or exception tasks can call an expert to get guided help, speeding up these activities.

Real-time, in the moment, uses are not the only way organizations are thinking of using these new tools. Any set of glasses on the right user can make videos of best practices and exception handling for training and benefit of all employees. Being able to capture images or videos of the actual work as its being done has also been shown to improve compliance. Smart glasses allow information sharing and connect the manufacturing workforce in ways previously not possible with a tablet, smartphone or laptop.

In addition to having in-view guidance that can drive down production error rates and the corresponding need for re-work, for large organizations such as aerospace manufactures, shaving just a few seconds off each task in the assembly process can result in big-time savings.

For example, if an employee equipped with smart glasses can do a task 12 seconds faster, that may not seem like much at first glance. But, when that task is performed 100 times a day across 1,000 workers, an organization can save 86,000 hours annually in its manufacturing process.

Ultimately, aerospace manufacturers are seeing that things are done faster, done right, and done once with a connected workforce leveraging smart glasses. We saw this with Airbus Helicopters where they put to inspectors side by side, one with smartglasses and the other with a tablet. The employee with smartglasses finished the inspection 47% faster than without and had better documentation.

ar smart glasses for manufacturing

Smart glasses can enable workers to access instructions, tutorials, and key process data in real-time on the factory floor via a heads up display.

Getting Started With Smart Glasses: Start Small

VREXA provides turnkey solutions for implementing smart glasses into your manufacturing. The desire for continuous improvement is a common factor that we have seen among all of our smart glasses customers in manufacturing. These businesses recognized that there is a better way to execute complex assembly jobs. They also recognized that there are many areas in their factories where people are doing many types of hands-on work. Finding a place to start with smart glasses can be overwhelming.

There are different production lines, different products, different steps in the process and each has slightly different needs. Should a first deployment of smart glasses be in materials handling and logistics? Should manufacturers examine applications in asset maintenance and repair? Could these devices benefit equipment and plant monitoring?
Aerospace manufacturers typically see the need for a solution in all of these areas.

The best way to begin is to start focused. Identify areas where there are specific problems that need real-time solutions. Don’t try to boil the ocean, but instead look for a use case that can be easily replicated and expanded – we have found that having a few dozen people involved in the initial process gives a company enough of a sample size to assess the effectiveness and create a supportive study.

Pick an area where smart glasses aren’t too “whacky” of an idea. As mentioned previously, smart glasses have shown themselves to be the most powerful and flexible of the wearable devices but they are also the best suited for core production tasks. Since many of these employees are already wearing safety glasses, introducing smart glasses to their uniform is not a cumbersome addition. Think of them as smart safety glasses.

Smart glasses are also only as capable as the software powering the user experience and coordinating the business logic of the manufacturer. Companies can grow their own solution or seek a professional-grade platform to give them access to industry-ready features or broader device support.

Because VREXA software platform works across all enterprise wearables, we are able to help organizations choose the right wearable device that best suits their specific manufacturing needs and environment.

Some smart glasses provide a more immersive experience. Some are more rugged. There are many considerations manufacturers should take into account when determining the right wearable device for the job. For example, do your employees wear thick gloves that make touchpad navigation impractical? Would voice commands provide a better user interface, or do your employees work in a noisy environment that would drown out voice commands? Perhaps gesture control is a feature your smart glasses need for optimal operation in your manufacturing environment.

Making The Right Decision With Smart Glasses

Manufacturers that identify problems that need solving in real-time have the potential to see major productivity and compliance gains from effective smart glasses.

This is especially true in the aerospace industries, where there are more than one million manufacturing and production workers in the United States alone.

We strongly believe that anyone who builds, moves, fixes, or monitors assets for their job can benefit from wearables in the workforce’s toolbox.

We are encouraged by the growing investments in IoT as a sign that manufacturers will recognize that the information produced by this network becomes its most powerful when it is put in the hands of their workers — or more accurately, in the workers’ line of sight.

To Schedule a FREE Demonstration Please Contact Us Today.